Double Glazing Window Locks Repairs
Double glazing window locks repairs are essential to protect your home. Faulty handles or hinges can allow drafts into your home and make windows vulnerable to burglars.
It's a good thing that it's simple to repair sluggish uPVC locks and handles without replacing your window or door unit. In most cases, cooling or lubricating your mechanism can help solve any issues.
Broken Glass
Double glazing window locks may wear out over time. As this happens, the handles can become hard to open or even locked shut. This can cause issues with ventilation and also pose a security threat. In order to rectify this, it's crucial to get the window repaired as quickly as possible.
Double-glazed windows comprise two or more glass panes, with a gas between them to provide insulation. A seal also holds the panes together. Condensation between the glass panes is typically an indication of an issue with one of these seals, which needs to be replaced. This usually involves replacing only one pane of glass and is less expensive than replacing the entire glass window.
Condensation and cloudiness are usually caused by a blowing seal on double-glazed windows. This can be caused by many reasons, such as air leaks or excessive humidity in the home. As soon as you notice the issue, it's crucial to call a double glazing expert to repair the gas seal and seal in your double-glazed windows.
It is possible to replace a single pane of double glazing glass however, it is not advised to do this without the help of an expert. This is due to the fact that it requires special tools and the proper knowledge to perform the task safely. You could damage the window frame, or your health if trying to do it yourself.
Many people use a crowbar to try and open their double-glazed windows when it's stuck but it will typically cause the window frame to be damaged and scratched. A specialist in window repair will be able to remove the handle and open your window without causing any further damage. They can also transform old window mechanisms into modern ones.
Over time, the hinges on windows will become stiffer and difficult to open, particularly if the area is noisy. It's important to regularly lubricate your window hinges using silicone spray. Be careful not to close the window using the handles or closing it heavily. This can damage the hinges.
Broken Sash
This is a common issue with older double-glazed windows. If the upper sash has been ripped out of its pocket, it can be difficult to lock it and open the window. This usually happens because pins are not engaged, or a balance shoe is been disconnected. Each sash is different, so it's important to know how yours are configured before you attempt to fix this.
This can be resolved by removing the sash, and then cleaning it thoroughly. This will let you know whether it's still a good fit. If not, put in sash stoppers to keep it in place. These can be purchased online or at most hardware stores. Once you've cleaned the sash and replaced the beads that separate, and grease the pulley axles using a Teflon or silicone spray. It is a good idea to label the weights prior to you remove them so that you can put them back in correctly.
A broken handle is a frequent issue. Window handles aren't easy to identify, but there are some indicators that tell you if yours is damaged. If the handle is spongy or stiff, or if it doesn't feel secure, it is likely broken.
It could be due to lack of use or the handle may have broken or become detached. In some instances, the handle may be internally broken and cannot be repaired. However, it is worthwhile to try to resolve the issue as soon as you can.
To remove the window sash, you may need to unscrew hinges that hold it to the frame. It's a challenging task, so you'll require someone to help you hold the sash securely. After you have removed the hinges, it's important to clean them as well as the areas around them. You should also try to attach the hinges again and check the handle to make sure that it's working properly. If it's not then you should think about replacing it. This will make your window as secure as it can be.
Broken Handle
It's not uncommon for window handles to break or become damaged over time. It is essential to fix any damaged handles as soon as possible in order to avoid security and function issues.
Fortunately, it is easy to replace the window handle. The window handle can be repaired by anyone with DIY skills. Contrary to the sash that is secured using multiple bolts, the window handle requires only two screws. After the new handle is in place, it's crucial to test it to make sure that the mechanisms are working properly. double glazing repair includes locking the handle and looking for any gaps that could allow drafts to be able to enter your home, or allow burglars to gain access.
The most frequent cause of the broken handle on a window is wear and tear caused by frequent use. However extreme stress or force can also lead to broken handles. If you force windows to open, it may cause additional stress on the handle. This increases the likelihood of damage.
Other reasons for a broken handle are poor maintenance, aging or design issues. Inadequate cleaning and lubrication may cause the handle to break down prematurely, and this is usually due to dirt or other debris that accumulates over time. Additionally, the handle can be damaged by improper installation or alignment issues.
If the previously mentioned fixes don't work then the Tasker might need to gain access to and take out the lock mechanism itself. This may involve removing the frame or breaking out the window frame as well as plastic bead (to give the Tasker more room to maneuver). A replacement lock could be installed that matches the shape of the existing uPVC handle. Once this is done, the new handle can be re-affixed and the process is completed. Tasker will give you an estimate of the cost of the repair in the event that this is the case.
Faulty Lock
It's important that you fix any broken window locks immediately. This is because a damaged window can lead to the development of draughts and weaken the security of your home barriers, making your home vulnerable to burglary. Window lock repair is typically an easy task, but it is better to let an expert handle the issue before it becomes worse and cost more in the end.
UPVC window handles are available in two different styles that include cockspur handles and espagnolette handles. The first makes use of a central rod that operates mushroom shaped locking cams that lock into window frame keepers. The latter has the handle that is attached to a spindle, which protrudes into the rod to activate the lock's cams that resemble mushrooms, also known as locking mushrooms. The latch of the lock snaps into the mortise catches on the window frame.
Both kinds of UPVC windows locks are at risk to damage, especially in older homes. This can happen if the sash becomes warped, misaligned or even comes loose. In these instances the lock must be re-installed to prevent the possibility of draughts and decrease in energy efficiency. A Tasker will replace the faulty locks for you and provide peace of mind knowing your windows are secure from intruders.
The first thing a Tasker does to repair your double glazing window lock is to look it over and determine the issue. Once they have the necessary details, they'll set up their tools prior to arriving at your home. They'll usually bring a Phillips-head screwdriver, needle-nose pliers wood putty, and fine-grit sandpaper.
If the sash has been misaligned, the Tasker will need to loosen the screws holding both pieces of the lock to the frame. The Tasker will then take off the latch and fill the mounting holes (if applicable) with wood putty before sanding the area to make it identical to the rest of the frame.
If the lock has become rusted it will be cleaned using an oil or wire brush. The lock will then be lubricated using grease to ensure it works smoothly. They'll also check if the latch is in a good condition and replace it.